EnviroTex Lite is the perfect product to use when making beautiful serving trays…
they are so easy to make and the results are wonderful! I got out some shells and created a memory tray of one of our trips to Florida.
Materials Required:
· Wooden Serving Tray
· Chalk it Up!, Licorice
· Iridescents, Onyx
· Shells, assorted
· Paint brushes
· Cups
· Stir Stick
· Lighter
Project Instructions:
I painted the inside and out of the tray with Licorice and let it dry.
Then, I painted a coat of Onxy over the Licorice and let it dry.
I measured out equal amounts of the EnviroTex Lite® resin and hardener.
Mix together and stir for 2 minutes.
Pour into a second cup and stir for 1 minute.
I painted the inside and out of the tray with Licorice and let it dry.
Then, I painted a coat of Onxy over the Licorice and let it dry.
I measured out equal amounts of the EnviroTex Lite® resin and hardener.
I poured this into the bottom of the prepared tray. I let this set up for about 10 minutes then.
I poured this into the bottom of the prepared tray. I let this set up for about 10 minutes then.
I added the shells where I wanted them to go. I used a lighter to remove the air bubbles that rose to the top and let this set for 12 hours.
Then I mixed up more resin as above and applied it over the top and let it set for another 12 hours and repeated with a third coat so that all of the shells were covered.
I added the shells where I wanted them to go. I used a lighter to remove the air bubbles that rose to the top and let this set for 12 hours.
Then I mixed up more resin as above and applied it over the top and let it set for another 12 hours and repeated with a third coat so that all of the shells were covered.
Then I mixed up more resin as above and applied it over the top and let it set for another 12 hours and repeated with a third coat so that all of the shells were covered.
The tray turned out great!
Leave a Reply