Mix EQUAL parts of the Promise Table Top hardener and resin. (To get 16 oz I had to use two cups at once!)

Stir for two minutes (be sure to scrape the bottoms and sides) then pour from the first cup into a second and mix with a new stir stick for another minute (or until there are no swirls visible).

Once the resin is ready, pour into smaller cups to add desired colors.

Add the colorants of your choice and stir gently. I used different colors to create a rainbow!

Next, pour your different colors into the mold and mix. There are lots of ways to do this, but use a popsicle stick or stir stick to swirl and mix your colors. Do this to create different patterns!

Allow the resin to sit in the mold for a few hours. Be sure to continually check on it. You want the resin to no longer be sticky, but not hardened. You also want it set enough so the resin doesn't run or move when you left up the mold.

Use a bowl, candle, or something else rounded to drape your mold over. I also used silicone cups to help hold the new shape.

My bowl was fully cured in about 72 hours (I live in a very humid, subtropical climate!) and I was able to then de-mold and enjoy!