Materials
- 6 oz Promise Table Top Epoxy
- Mobile or Wind Chime Mold
- Color Creator Pacific Gift Pack
- Small mixing cups
- Mixing cups and stir sticks
- Gloves
- Drill
- Hanging Hardware
Instructions
- Prepare the Promise Table Top Epoxy. This is a multi-step process so don’t start mixing until you are ready to do the whole process from beginning to end! If it's cold, add the bottles to a warm water bath before mixing for about 15 minutes. Mix EQUAL parts of the Hardener and the Resin.
- Stir for two minutes (be sure to scrape the bottoms and sides) then pour from the first cup into a second and mix with a new stir stick for another minute (or until there are no swirls visible).
- Gently pour into your smaller mixing cups and stir in a TINY amount of mica power. Add more if needed to achieve the colors you want! Fill the molds with each color of mixed resin you want.
- Use a heat gun to pop any bubbles that rise to the surface of your project. You may have to repeat this a few times to get them all!
- Allow the resin to cure for 24 – 72 hours (climate dependent). Demold the mobile pieces and drill holes to add the hanging hardware.
Notes
Safety first! Before you start working with epoxy resin, make sure that you’re wearing protective eyewear and gloves, cover your workspace or use a silicone mat in case of spills, and be sure to work in a well-ventilated area.